Skip to main content

Evaluation of food drying with air dehumidification system

 


The main challenge in global food demand is how to obtain high quality dry food products in efficient processing. The dry food or its extract can be a good option due to the long life storage and consumer convenience. To realize this preference, drying process offers the major role corresponding to the moisture removal from wet product. In general, the agriculture and food products with high moisture content (vegetables, herbs, starch products) are dried at low to moderate temperatures to conserve the valuable ingredients (protein, vitamins, enzymes, oil) as well as physical appearance such as color, and texture.

Meanwhile, the modern drying technology has been widely developed with attractive results in the product quality aspects. However, the efficient dryer development has been scared. For example, the energy efficiency in freeze and low temperature dryers is lower than that of a conventional convective dryer. This is due to the low value of driving force for moisture transfer and higher latent heat of moisture evaporation. Recently, the energy usage has become an important issue with respect to the limitation of fossil fuel supply. On the other hand, the availability of biomass as side product of agriculture crops has not been intensively used as renewable energy resource in drying process.

Conventional dryer with sunlight is very advantageous due to its low energy cost, and environmentally benign. The dryer has been widely used for a long time in various sectors, such as agriculture, fishery, forestry, and herbal medicine products. Unfortunately, the uses of this dryer is also restricted by main drawbacks of this dryer such as sustainability and product quality, which are rooted from its climate dependent.

Thus, the application of dryer with pre-dehumidified air for various food or agriculture crops drying can be an attractive option.

Materials and Methods

Based on the model and simple experimental test, the adsorption dryer with zeolite has shown attractive performances. In this study, the dryer was tested in wider range application for agriculture crops drying. This work consisted of two main steps. Firstly, the two types of dryer (fluidized bed and tray dryers) were constructed in laboratory scale equipped with an air dehumidification section with zeolite. The dryers were used for different application (fluidized bed dryer for paddy drying, and tray dryer for onion drying). Secondly, the dryers performances were evaluated based on product quality, drying time, and or/ heat efficiency. The heat efficiency was estimated referring to the total heat used for evaporated water divided by the total heat introduced in the system. The product quality was analyzed based on physical properties as well as important substance content.

Paddy Drying

The paddy drying system was designed as a fluidized bed dryer. The dryer was equipped with a blower to deliver air for the fluidization process. Initially, ambient air at a relative humidity (RH) of 70 – 80% and temperature about 30°C was flown to the heater at a velocity of 4.0 m.s-1. The air was heated up to dryer temperature (designed as 40°C). The air was then used for paddy drying with initial moisture content of about 25% (w/w).

Onion Drying

Generally, onion was harvested from a farm with 88 – 92% moisture content. After drying, the average moisture content in the onion was desired to be 80 – 85%. The onion drying was conducted in tray dryer completed with zeolite, as presented. The fresh air was heated up to 50°C by an electric heater. The air was used for onion drying with addition of a zeolite pack.

Heat Efficiency Estimation

The paddy and onion drying were continued with rice husk combustion as a heat source. The rice husk with combustion heat value up to 15 MJ.kg-1 was obtained as a side product of rice mill industries. Theoretically, with latent heat of moisture evaporation about 2.5 MJ.kg-1 , one kilogram of rice husk can evaporate 6 kg of free moisture.

Conclusion

The air dehumidification has been applied for tray and fluidized bed dryers. The dryers were used for paddy and onion drying. The zeolite as moisture adsorbent performed well. Therefore, the air may be significantly dehumidified. Based on product quality retention, drying time estimation, and heat utilization, the air dehumidification affected the drying performance positively. The fluidized bed and tray dryers were then operated with rice husk as a heat supply. Results showed that the heat efficiency can achieve around seventy fifth. This performance may be promising for sustainable food drying development.

We at KERONE have a team of experts to help you with your need for air dehumidification in various products range from our wide experience.

Comments

Popular posts from this blog

Artificial Intelligence (A.I) in Food Industry

  When discussing about the food industry, technology isn’t generally the first thought that comes to mind. But these days, technology in the food industry is a required part of   food production   and delivery processes. We find food through applications, and manufacturers produce it with the help of robotics and data processing. Tech could remarkably enhance packaging, increasing shelf life and food safety. The eminence of food is also improving while manufacturing costs are less. Knowing what better to produce in huge amount of numbers is the key to increase revenue. Customer and market insistence are changing very fast, so it is even more important to be one-step ahead of the competition. Explaining the most habitual tastes and preferences is the most praised thing for a food business owner as well as for a food manufacturer. For example, the newest trends in food tech are attached to a stream of healthy lifestyle followers. In order to recognize them,  Machine Learning  utilizes t

Different Types of Sterilization Process

  Sterilization can be accomplished by an amalgamation of heat, chemicals, irradiation, high pressure and filtration such as steam under pressure, dry heat, ultraviolet radiation, gas vapour sterilants, chlorine dioxide gas etc. Successful sterilization strategies are necessary for working in a lab and negligence of this could lead to severe consequences, it could unexpectedly cost a life. So what are the more frequently utilized methods of sterilization in the laboratory, and how do they work? The Sterilization is conveyed out by the methods according to requirement. The methods are: 1. Moist Heat Sterilization 2. Dry Heat Sterilization 3. Gas Sterilization and Others. Moist Heat Sterilization:  Moderate pressure is utilized in steam sterilization. Steam is utilized under pressure as a means of accomplishing an elevated temperature. It is dominant to confirm the accurate quality of steam is utilized in order to keep away the problems which follow, superheating of the steam, failure of

Microwave Continuous Vulcanization (CV) Rubber Curing Oven

Vulcanization is process of converting natural rubber or rubber polymers into more durable and mechanically strengthens rubber by the process of mixing sulfur and processing. This process results in changing the cross-linking bonds within the natural rubber and making bonds more strong and non-sticky.  Vulcanization curing is achieved by heating the natural rubber or rubber polymer at very high temperature along with sulfur or any other agent, such high level of temperature rise results into changing of bond within the rubber and resulting in non-sticky, maker it lesser deformable when heated, and removes the brittleness this helps rubber to achieve the desired level of elasticity. Continuous Vulcanization curingprocess is most common process used for variety of application. In the process Continuous Vulcanization curing rubber and accelerator is put under high temperature and pressure, this mixture is passed through the continuous heating line during the process, some of C-H bo